Using the Bump Buttons

The Bump buttons are used to flash an individual channel to the level of the master fader. Holding the Bump button on is the equivalent of pushing the channel fader all the way up.

Using the Group Memory Feature

Group is a list of channels controlled by the Group slider.

Any of the 512 channels may be assigned to the Group. The list may contain ranges of channels or individual channel numbers, and is useful for creating washes or having control independently from the other channels.

Create and edit a Group using the push wheel settings, then Add, Delete and Thru switches. If a channel is assigned to the group and is also included in the manual section, the higher level is output.

Add: Adds individual channels to the list.
Set an address in the push wheel window, press Add. Repeat as desired.

Delete: Removes individual channels from the list
Set an address in the push wheel window, press Delete. Repeat as desired.

Thru Adds or deletes a range of channels.
After Adding or Deleting and while the Group LED is lit, set the end of the range, and press Thru.

To delete the entire Group from memory, set the push wheel address to 9XX
(where XX = any numbers) and press Delete.

Examples of Group command sequences and resulting channel group control:

*THRU must be pressed while the Group LED is still lit.
 

NOTE: After assigning channels to the Group slider, the push wheel indicator may not show the current starting address for the 12 manual sliders. You may want to set it back to the starting address that you last set as a reminder. This will assure that your starting address does not inadvertently get changed. Pushing the Address Change switch again is not necessary.

Designed and manufactured in USA by Integrated Controls Inc. 2851 21st St.
Prices, specifications, features and availability subject to change without notice